3-Trifluoromethylbenzylcyanide CAS 2338-76-3

Product name:3-Trifluoromethylbenzylcyanide
CAS:2338-76-3
MF:C9H6F3N
MW:185.15

EINECS: 219-053-8
Boiling point: 92-93 °C
Density: 1.187 g/cm3

Purity:≥99%

White powder

1. 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 is a key intermediate in the synthesis of pharmaceuticals, particularly anti-inflammatory and analgesic drugs.
2. 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 is used in the formulation of agrochemicals, enhancing the efficacy of pesticides and herbicides.
3. 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 is explored in material science for creating advanced polymers with enhanced thermal and chemical resistance.
4. 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 serves as a versatile building block for synthesizing fluorinated compounds used in medicinal chemistry and fine chemical production.

1. Store 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 in a tightly closed container in a cool, dry, well-ventilated place below 15°C.
2. 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 should be kept away from heat, sparks, and open flames as it is a flammable liquid with a flash point of 49°C.
3. Keep 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 away from oxidizing agents and reducing agents to prevent hazardous reactions.
4. 3-Trifluoromethylbenzylcyanide CAS 2338-76-3 should be stored in an area without drain or sewer access, separated from food and feed materials.

1. Fire extinguishing agents
Fire extinguishing methods and fire extinguishing agents
For small (initial) fires, use agents such as "ethanol" foam, dry chemicals or carbon dioxide. For large fires, use water to extinguish the fire. Use a large amount (like a flood) of water in a spray form; the water jet may be ineffective. Use a large amount of water to cool all affected containers.

2. Special hazards arising from this substance or mixture
Carbon oxides, nitrogen oxides, hydrogen fluoride, hydrocyanic acid

3. Recommendations for firefighters
If necessary, wear a self-contained breathing apparatus to fight the fire.

4. Further information
Cool unopened containers with water spray.

1. Precautions for Safe Operation
Avoid contact with skin and eyes. Avoid inhalation of vapors and smoke.
Do not approach fire sources. - Strictly prohibit the use of fire. Take measures to prevent static electricity accumulation.

2. Conditions for Safe Storage, including any incompatibilities
Store in a cool place. Keep the container sealed and store in a dry and ventilated area.
Opened containers must be carefully resealed and kept upright to prevent leakage.

1. Permissible Concentration
Maximum Permissible Concentration
There are no known national exposure limits.

2. Exposure Control
Appropriate technical control
Operate in accordance with good industrial hygiene and safety standards. Wash hands before breaks and at the end of work.
Personal Protective Equipment
Eye/face protection
Use face masks and safety glasses that have been tested and approved according to official standards such as NIOSH (USA) or EN 166 (EU) to protect the eyes.
Skin protection
Wear gloves. The gloves must be inspected before use.
Please use the appropriate method to remove the gloves (do not touch the outer surface of the gloves), and avoid any skin contact with this product.
After use, please handle the contaminated gloves carefully in accordance with relevant laws and regulations and effective laboratory procedures. Please wash and dry your hands.
The selected protective gloves must comply with the EU's 89/686/EEC regulations and the derived EN 376 standard.
Body protection
Full chemical-resistant work clothes, flame-retardant anti-static protective clothing,
The type of protective equipment must be selected based on the concentration and quantity of hazardous substances in the specific workplace.
Respiratory System Protection
If the risk assessment shows that an air-purifying respiratory mask with a filtering function is required, use a full-face multi-functional respirator (US) or ABEK type (EN 14387) respirator cylinder as a backup for engineering control. If the respirator is the only means of protection, use a full-face supply air respirator. Respirators must use respirators and parts that have been tested and passed government standards such as NIOSH (US) or CEN (EU).

1 kg/bag, 25 kg/drum or based on customers' requirements.

Transportation

We arrange suitable logistics schemes based on each customer's needs. Small-volume goods can be delivered via air shipment or international express services like FedEx, DHL, TNT, UPS and specialized cross-border logistics lines. For bulk orders, sea transportation can be arranged to reach your appointed port. Beyond that, we are capable of offering value-added customized logistics services considering product features and specific client requests.

Payment

 

To facilitate smooth cooperation,we offers multiple flexible settlement solutions for clients. Small orders can be settled via PayPal, Western union. For substantial orders, we adopt T/T, L/C at sight. Furthermore, Alipay and WeChat pay have become popular payment choices among our customers.

 

 

 

 

 

Customer Visit

 

 

Customer Trust