Products Description
Product name:4-Chlorobutyronitrile
CAS:628-20-6
MF:C4H6ClN
MW:103.55
EINECS: 211-031-6
Boiling point: 195-197 °C
Density: 1.095 g/mL
Purity:≥99%
Apparance
Colorless and transparent liquid
Application
1. 4-Chlorobutyronitrile CAS 628-20-6, also known as γ-Chlorobutyronitrile, is an aliphatic chloro-nitrile intermediate.
2. 4-Chlorobutyronitrile CAS 628-20-6 is widely used in nucleophilic substitution reactions for the synthesis of pyrrolidine and other nitrogen heterocyclic compounds.
3. 4-Chlorobutyronitrile CAS 628-20-6 serves as a key raw material for pharmaceutical intermediates and fine chemical derivatization.
Storage
1. Store 4-Chlorobutyronitrile CAS 628-20-6 in a tightly closed container in cool, dry and ventilated area.
2. Keep 4-Chlorobutyronitrile CAS 628-20-6 away from strong oxidants, strong bases and moisture.
3. 4-Chlorobutyronitrile CAS 628-20-6 is stable under normal temperature; avoid long-term exposure to humid air.
Health Hazards of 4-Chlorobutyronitrile CAS 628-20-6
1. 4-Chlorobutyronitrile CAS 628-20-6 causes skin irritation and redness upon direct contact.
2. 4-Chlorobutyronitrile CAS 628-20-6 triggers serious eye irritation, burning and tearing after splashing.
3. Inhalation of vapour of 4-Chlorobutyronitrile CAS 628-20-6 irritates respiratory tract and may cause poisoning symptoms.
4. 4-Chlorobutyronitrile CAS 628-20-6 is toxic if swallowed and may inhibit cellular respiration.
Is 4-Chlorobutyronitrile CAS 628-20-6 safe?
1. 4-Chlorobutyronitrile CAS 628-20-6 must be handled in a fume hood with effective local exhaust ventilation.
2. 4-Chlorobutyronitrile CAS 628-20-6 requires splash goggles, heavy-duty nitrile gloves and long-sleeve protective clothing.
3. 4-Chlorobutyronitrile CAS 628-20-6 is combustible liquid; toxic cyanide and chloride fumes release under thermal decomposition.
4. Spilled 4-Chlorobutyronitrile CAS 628-20-6 should be absorbed with inert absorbent and disposed as toxic hazardous waste.
Emergency Measures
1. Description of Necessary Emergency Measures
General Recommendations
Consult a doctor. Present this safety instruction manual to the doctor who arrives at the scene.
Inhale
If inhaled, move the patient to an area with fresh air. If breathing stops, perform artificial respiration. Consult a doctor.
Skin contact
Rinse with soap and plenty of water. Immediately take the patient to the hospital. Consult a doctor.
Eye contact
Use water to rinse the eyes as a precautionary measure.
Ingestion
Do not induce vomiting. Do not give anything to the unconscious person by mouth. Rinse the mouth with water. Consult a doctor.
2. Main symptoms and effects, acute and delayed effects
As far as we know, the chemical, physical and toxic properties have not been fully studied.
3. Instructions and recommendations for timely medical treatment and required special handling
There is no data available.
Firefighting measures
1. Fire extinguishing media
Fire extinguishing methods and agents
For small (initial) fires, use agents such as "ethanol" foam, dry chemicals or carbon dioxide. For large fires, use water as much as possible to extinguish the fire. Use a large amount (like a flood) of water for spraying; the water column may be ineffective. Cool all affected containers with a large amount of water.
2. Special hazards from this substance or mixture
Carbon oxides, nitrogen oxides, hydrogen chloride gas
3. Advice for firefighters
If necessary, wear a self-contained breathing apparatus to fight the fire.
4. Further information
Cool the unopened containers with water spray.
Emergency response for leaks
1. Personal protective measures, protective equipment and emergency response procedures
Wear a respirator. Avoid inhalation of vapors, smoke or gases. Ensure adequate ventilation. Remove all sources of fire. Evacuate all personnel to a safe area.
Be cautious of vapor accumulation reaching an explosive concentration. Vapor can accumulate in low-lying areas.
2. Environmental protection measures
If safety can be ensured, measures can be taken to prevent further leakage or spillage. Do not allow the product to enter sewers.
3. Collection, removal methods of leaked chemicals and the disposal materials used
Contain the spillage, use electrostatic vacuum cleaners or wet brushes to collect the spillage and place it in containers, according to local regulations (see Part 13). Place in suitable sealed containers for handling.
Recommended best-selling products
| Items | Product name | CAS |
| 1 | S-2-Chloromandelic acid | 52950-19-3 |
| 2 | 3-Amino-2-methylbenzoic acid | 52130-17-3 |
| 3 | Ethyl isonicotinate | 1570-45-2 |
| 4 | O-Phenetidine | 94-70-2 |
| 5 | 2-Chloro-4-nitrobenzoic acid | 99-60-5 |
| 6 | 4-Hydroxybenzyl cyanide | 14191-95-8 |
| 7 | Methyl 4-Trifluoromethylbenzoate | 2967-66-0 |
| 8 | 3-(Trifluoromethyl)benzoyl chloride | 2251-65-2 |
| 9 | 4-Methoxyphenethylamine | 55-81-2 |
| 10 | 4-Bromomethylbenzoic acid | 6232-88-8 |
Packaging
1 L/bottle, 25 L/drum, 200 L/drum, 1000 L/IBC drum or based on customers' requirements.
Packaging Pictures


Transportation & Payment

Transportation
We arrange suitable logistics schemes based on each customer's needs. Small-volume goods can be delivered via air shipment or international express services like FedEx, DHL, TNT, UPS and specialized cross-border logistics lines. For bulk orders, sea transportation can be arranged to reach your appointed port. Beyond that, we are capable of offering value-added customized logistics services considering product features and specific client requests.
Payment
To facilitate smooth cooperation,we offers multiple flexible settlement solutions for clients. Small orders can be settled via PayPal, Western union. For substantial orders, we adopt T/T, L/C at sight. Furthermore, Alipay and WeChat pay have become popular payment choices among our customers.

Customer Visit

Customer Trust

FAQ
fAQ
Q:1.What is your MOQ?
A: The minimum order quantity is 1kg, but it varies depending on the different products and is flexible.
Q:2. Is sample available?
A: Yes, of course, small sample for test can be offered.
Q:3.How long can the product be stored?
A: Under proper sealed storage conditions, the shelf life is 24 months.
Q:4.Will you support after-sales service if there is any quality problem?
A: Please provide test data and photos once quality issue occurs. We will negotiate proper solution for you.
Q:5.What documents will be provided for customs clearance?
A: We can provide commercial invoice, packing list, MSDS, COA as customs required.
Q:6.What is the lead time?
A: If shipped by couriers or air, it usually cost 6-10 days.
If shipped by sea, it usually cost 5-41 days, which depends on your destination.
Contact Us
we are here for you
anna@arisenewmaterial.com
info@arisenewmaterial.com
Hot Tags: 4-chlorobutyronitrile cas 628-20-6, China 4-chlorobutyronitrile cas 628-20-6 manufacturers, suppliers, factory, 3 Aminoacetophenone CAS 99 03 6, CAS 16732 70 0, CAS 348640 06 2, Ethyl-5-Bromo-2-carboxylate, Piperonyl isobutyrate, Sodium Methanesulfonate CAS 2386 57 4

