Products Description
Product name:4-Fluorothiophenol
CAS:371-42-6
MF:C6H5FS
MW:128.17
EINECS: 206-737-6
Melting point: 43-46°C
Boiling point: 164-168 °C
Density: 1.203 g/mL
Purity:≥99%
Apparance
Colorless and transparent liquid
Application
1. 4-Fluorothiophenol CAS 371-42-6, also known as 4-fluorobenzenethiol, is a fluorinated aromatic thiol intermediate.
2. 4-Fluorothiophenol CAS 371-42-6 is a key raw material for the synthesis of bicalutamide and other anticancer pharmaceutical compounds.
3. 4-Fluorothiophenol CAS 371-42-6 serves as a building block for sulfur-containing fine chemicals and sulfide derivative synthesis.
Storage
1. Store 4-Fluorothiophenol CAS 371-42-6 in a tightly sealed container under refrigerated conditions (2-8°C).
2. Keep 4-Fluorothiophenol CAS 371-42-6 away from strong oxidants, heat and ignition sources.
3. 4-Fluorothiophenol CAS 371-42-6 is air-sensitive; avoid prolonged exposure to air and humid environment.
Health Hazards of 4-Fluorothiophenol CAS 371-42-6
1. 4-Fluorothiophenol CAS 371-42-6 is toxic by skin contact and causes skin irritation upon direct contact.
2. 4-Fluorothiophenol CAS 371-42-6 triggers serious eye irritation, burning and tearing after splashing.
3. Inhalation of vapour of 4-Fluorothiophenol CAS 371-42-6 is toxic and severely irritates respiratory tract.
4. 4-Fluorothiophenol CAS 371-42-6 is toxic if swallowed and may cause systemic poisoning.
Is 4-Fluorothiophenol CAS 371-42-6 safe?
1. 4-Fluorothiophenol CAS 371-42-6 must be handled in a fume hood with effective local exhaust ventilation.
2. 4-Fluorothiophenol CAS 371-42-6 requires splash goggles, heavy-duty nitrile gloves and long-sleeve protective clothing.
3. 4-Fluorothiophenol CAS 371-42-6 is flammable liquid; vapours may form flammable mixtures with air.
4. Spilled 4-Fluorothiophenol CAS 371-42-6 should be absorbed with inert absorbent and disposed as toxic hazardous waste.
Emergency Measures
1. Description of Necessary Emergency Measures
General Recommendations
Consult a doctor. Present this safety instruction manual to the doctor who arrives at the scene.
Inhale
If inhaled, move the patient to an area with fresh air. If breathing stops, perform artificial respiration. Consult a doctor.
Skin contact
Rinse with soap and plenty of water. Consult a doctor.
Eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a doctor.
Ingestion
Do not induce vomiting. Do not give anything to the unconscious person by mouth. Rinse the mouth with water. Consult a doctor.
2. Main symptoms and effects, acute and delayed effects
Nausea, headache, vomiting. As far as we know, the chemical, physical and toxic properties of this substance have not been fully studied.
3. Instructions and guidelines for timely medical treatment and required special handling
No data available.
Fire Prevention Measures
1. Fire Extinguishing Media
Fire Extinguishing Methods and Fire Extinguishing Agents
For small (initial) fires, use substances such as "ethanol" foam, dry chemicals or carbon dioxide. For large fires, try to use water to extinguish the fire. Use a large amount (like a flood) of water in a spray form; the water stream may be ineffective. Use a large amount of water to cool all affected containers.
2. Special Hazards Caused by This Substance or Its Mixtures
Carbon oxides, sulfur oxides, hydrogen fluoride
3. Recommendations for Firefighters
If necessary, wear a self-contained breathing apparatus to fight the fire.
4. Further Information
Cool unopened containers with water spray.
Emergency response for leaks
1. Personal Protective Measures, Protective Equipment and Emergency Response Procedures
Use personal protective equipment. Avoid inhalation of vapors, smoke or gases. Ensure adequate ventilation. Remove all ignition sources.
Evacuate personnel to a safe area. Be cautious of vapor accumulation reaching an explosive concentration. Vapor can accumulate in low-lying areas.
2. Environmental Protection Measures
If safety can be ensured, take measures to prevent further leakage or spillage. Do not allow the product to enter the sewer.
3. Methods for Containment, Removal of Leaking Chemicals and Disposal Materials
Contain the spillage, use electrostatic vacuum cleaners or wet brushes to collect the spillage and place it in containers, and handle according to local regulations (see Part 13).
Recommended best-selling products
| Items | Product name | CAS |
| 1 | Methyl isobutyrylacetate | 42558-54-3 |
| 2 | Triisopropyl phosphite | 116-17-6 |
| 3 | 2-Methoxyphenylacetone | 5211-62-1 |
| 4 | 2 4-Dichlorobenzonitrile | 6574-98-7 |
| 5 | 3 4-Dimethoxyphenylacetonitrile | 93-17-4 |
| 6 | 4-Fluorobenzophenone | 345-83-5 |
| 7 | 3 4-Dichlorophenol | 95-77-2 |
| 8 | 2 3-Dimethylphenol | 526-75-0 |
| 9 | 2-Chlorofluorobenzene | 348-51-6 |
| 10 | 1-Bromo-4-tert-butylbenzene | 3972-65-4 |
Packaging
1 L/bottle, 25 L/drum, 200 L/drum, 1000 L/IBC drum or based on customers' requirements.
Packaging Pictures


Transportation & Payment

Transportation
We arrange suitable logistics schemes based on each customer's needs. Small-volume goods can be delivered via air shipment or international express services like FedEx, DHL, TNT, UPS and specialized cross-border logistics lines. For bulk orders, sea transportation can be arranged to reach your appointed port. Beyond that, we are capable of offering value-added customized logistics services considering product features and specific client requests.
Payment
To facilitate smooth cooperation,we offers multiple flexible settlement solutions for clients. Small orders can be settled via PayPal, Western union. For substantial orders, we adopt T/T, L/C at sight. Furthermore, Alipay and WeChat pay have become popular payment choices among our customers.

Customer Visit

Customer Trust

FAQ
fAQ
Q:1.What is your MOQ?
A: The minimum order quantity is 1kg, but it varies depending on the different products and is flexible.
Q:2. Is sample available?
A: Yes, of course, small sample for test can be offered.
Q:3.How long can the product be stored?
A: Under proper sealed storage conditions, the shelf life is 24 months.
Q:4.Will you support after-sales service if there is any quality problem?
A: Please provide test data and photos once quality issue occurs. We will negotiate proper solution for you.
Q:5.What documents will be provided for customs clearance?
A: We can provide commercial invoice, packing list, MSDS, COA as customs required.
Q:6.What is the lead time?
A: If shipped by couriers or air, it usually cost 6-10 days.
If shipped by sea, it usually cost 5-41 days, which depends on your destination.
Contact Us
we are here for you
anna@arisenewmaterial.com
info@arisenewmaterial.com
Hot Tags: 4-fluorothiophenol cas 371-42-6, China 4-fluorothiophenol cas 371-42-6 manufacturers, suppliers, factory, 2 3 dihydrofuran 2 3 DHF CAS 1191 99 7, 2-Indanol, CAS 16732 70 0, Neopentyl glycol, Tin II Oxalate CAS 814 94 8, Zinc acrylate

